33KV Neutral Grounding Resistor Manufacture

33KV Neutral Grounding Resistor Manufacture standard:IEEE32 service: 50/60Hz system resistor value:1~2000ohms current:1~2000

BaoDing MingRui Optoelectronics Technology Co,Ltd have outstanding technical research team and perfect equipments .Our company specially engaged in distribution systems neutral grounding of research,produce, sales, and service. Have developed and produced neutal grounding resistor cubicle for transformer are suitable for 6~35KV and cable with the city of distribution grids, large industrial enterprises and factories, airports, ports, the subway and other important to network user with electricity,and coal enterprises 0.66KV, powerplants are 0.4KV,6KV,10kv.

   Typical Technology Parameters Of The Product

Product Type	System Voltage (kV)	Rated Current (A)	Short-time Flow Time (S)	Rated ResistanceΩ (±5%)	Insulation withstand voltage kV
					8/20μSLightning	1minpower frequency
MRD-BJ-6/36.4	6.3	100	10	36.4	60	32
MRD-BJ-6/18.2	6.3	200	10	18.2	60	32
MRD-BJ-6/9.09	6.3	400	10	9.09	60	32
MRD-BJ-6/6.06	6.3	600	10	6.06	60	32
MRD-BJ-10/15.16	10.5	400	10	15.16	75	42
MRD-BJ-10/10.10	10.5	600	10	10.10	75	42
MRD-BJ-10/7.57	10.5	800	10	7.57	75	42
MRD-BJ-10/6.06	10.5	1000	10	6.06	75	42
MRD-BJ-35/20.20	35	1000	10	20.20	185	95
MRD-BJ-35/10.10	35	2000	10	10.10	185	95

    Can design different kinds of resistors basing on the user requirements,resistance is from 1Ωto 2000Ω,the flowing current ia allowed from Ω~2000Ω,and the flowing time is 10s,15s,30s,60s,2h.

   Service Condition:

    1.Generally applies to outdoors,used in the system of 50 Hz and 60 Hz.

    2.The altitude shall not exceed 3500m.

    3.Ambient temperature : -20°C~+70°C,Relative humidity:≤95%

    4.Wind pressure is not above 700Mpa (amount to wind velocity 34m/s)

    5.Earthquake intensity :< 8

    6.Thickness of ice coating: <10mm

    7.Gradation for surface pollution of air : not above class 4

    8.The air at the installation site shall be free from flammable gas, explosive gas,corrosive 

       gas,and conductive dust.

    9.As resistor is heating element,when use it ,the temperature will rise highly,so the installation    of resistors should be in the place around with gap,to prevent the outside heat source.please attation,when installing and using.

   Notice for Ordering:

    Please let us know the parameters below.

    1. system in the rated working voltage: (kv)

    2. any temporary current is allowed to flow:(A)

    3. Nominal resistance:(Ω)

    4.Add current transformer or not(CT): ratios and capacity,composite error.

    5.in from up and out from down,in from down and out from down,in from side and out from side, in from side and out from down, can be selected.

    6.Any temporary current allowed to flowing time.

    7.Material of resisror cubicle,protection grade of cubicle, marked and installation location.

    8.whether need to add the grounding record and controlling equipments of temperature and  humidity.

   If have any question please contact with us.We desire to be your cooperation partners

33KV Neutral Grounding Resistor Manufacture